Friday, July 3, 2015

This solution covers for hardware level of repair for Samsung gt-s5360 Lcd Light Not Working problem and Also you will find Samsung gt-s5360 Lcd information in the diagrams further in this article.
Just see the solution preview below for it shows which track to be check and make jumper.

Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to  stay up to date.Samsung Galaxy y gt-s5360 Light Solution
Samsung gt-s5360 Lcd Light Not Workng
Samsung gt-s5360 Lcd  Light Problem

Type Or Paother Option Light Way Solution,
Samsung Gt-S5360,No Light & Broadcom Cpu Is Heated,Transistor Is Heated, Remove 3 Components,
Then Apply Jumper,Got The Another Light Supply Done

Note: Please note that even though every solution posted on out website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You :)

Monday, June 22, 2015

Nokia 110 Insert Sim Solution Jumper

This image is a picture of how to do repairs insert sim on nokia 110, see the sim lines above. just check the track alone.

Wednesday, June 17, 2015

SM-G313 Samsung Galaxy V (Off Total Due Short VBAT)


damage:
- Total death due to short VBAT.

analysis:
- Of the many cases short of full on track Galaxy V VBAT, very difficult to be used as a benchmark. For example in the case of this one, short VBAT comes from a small capacitor near the CPU.
- Unplug just capasitornya, of course, through the process known as heat detection via Power Supply.




VBAT filter capacitor causes broken discarded.



The final result, HH conditions return to normal

Nokia E90 (End Line BSI)



damage:   
- Connectors batrai dislodged.
- Ground & BSI break point.

analysis:
- There is no alternative path BSI in addition to unplug IC Avilma.
- Line BSI batrai connector is connected directly to the foot L11 Avilma.
- Unplug Avilma, then jumper from under the IC.
 
Batrai connectors conditions are dislodged and dropped out lanes.

Unplug IC process Avilma & BSI line of foot jumper L11 Avilma.

Enlarging images.

The process of reassembling IC Avilma.

Enlarging images.

                                      HP conditions return to normal.